If you hit a problem or have feedback, leave a comment below. Within minutes you can flush your USB drive with your favorite Linux distribution and use it to install the operating system on your PC or laptop. The command will show a progress bar while flashing the image, and the process may take several minutes: 458+1 records inġ921843200 bytes (1.9 GB, 1.8 GiB) copied, 147.006 s, 13 MB/sĬreating a bootable Linux USB drive is a relatively straightforward task. sudo dd bs=4M if=/path/to/ubuntu-18.04.2-desktop-amd64.iso of=/dev/sdx status=progress oflag=sync Also, make sure you are using the correct path to the ISO file. I mean on Windows/Machintosh I can create a bootable USB stick in 10min. Make sure you replace /dev/sdx with your drive and do not append the partition number. The last step is to flash the ISO image to the USB drive. To do so, use the umountĬommand followed by either the mount point or the device name: sudo umount /dev/sdx1 Before flashing the image, you need to unmount the USB device. On most Linux distributions, the USB flash drive will be automatically mounted when inserted. In this example, the USB device’s name is /dev/sdx, but this may vary on your system └─sdx1 8:17 1 7.5G 0 part /run/media/linuxize/Kingston The output will look something like this: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT The best tool for this job is lsblk: lsblk Next, you need to find out the name of the USB drive. Insert the USB flash drive into the USB port. This is a quick and easy process and requires no additional software to be installed. This section will show you how to create a bootable Linux USB stick from the command line using the dd tool, which is available on all macOS and Linux systems. Creating Bootable Linux USB Drive from the Command Line # That’s all! You have a bootable Linux on your USB stick. Once the file is downloaded, double-click on it and follow the installation wizard.Ĭreating Bootable Linux USB Drive using Etcher is a relatively straightforward process:Ĭonnect the USB flash drive to your system and Launch Etcher.Ĭlick on the to close the Etcher window. , and download the most recent Etcher version for your operating system. It is a free and open-source utility for flashing images to SD cards & USB drives and supports Windows, macOS, and Linux. There are several different applications available for free use, which will allow you to flash ISO images to USB drives. Creating Bootable Linux USB Drive with Etcher # , etc.) and download the latest ISO file. Visit the distribution download page ( Ubuntu We’ll use the latest Ubuntu version, but the steps explained in this article should work for any other Linux distribution. This file contains everything you need to install the Linux distro on your system. To create a bootable USB drive, first, you need to download the distribution ISO file. You can use this USB stick to boot and test out or install the Linux distribution on any computer that supports booting from USB. This tutorial will take you through the steps necessary to create a bootable Linux USB stick on Windows, macOS, and Linux machines. Usually, when installing a fresh copy of some Linux distribution on your laptop or PC, you’ll need a bootable USB containing the distribution you want to install.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |